PROSENSE DPM2 Series Digital Panel Meter

( Model shown:  DPM2-AT-2R-HL  Click here to buy )

DPM2 Series Digital Process Meter Overview

Your Low-Cost Digital Display of Analog Process Signals, Temperature (in either Fahrenheit or Celsius) from RTD or Thermocouple Temperature Sensors or Potentiometer & Resistive Inputs.

The ProSense DPM2 series offers a simple, low cost digital display of analog process signals. Temperature in either Fahrenheit or Celsius from RTD or Thermocouple Temperature Sensors, Potentiometer or Resistance inputs. The 4-digit red LED display is easily scaled into any engineering units from -9999 to 9999 with a selectable decimal point location. Two point direct or reverse acting linear scaling values can be entered manually or by introducing actual sensed process values in Teach mode. Temperature inputs are pre-configured for fixed temperature ranges based on the type of sensor used and can be displayed with 1 or 0.1 degree of resolution.

The DPM2-AT-2R-HL model includes (2) 8A SPDT relay outputs can be set to activate on an increasing or decreasing input signal with hysteresis or time delay operation. The digital meter is powered from an external wide range 20-265VAC or 11-265VDC power supply and provides 24VDC for external sensor excitation. The (1/8 DIN) housing is easy to install in a panel and the meter face has an IP65 rating. Configuration parameters can be totally or selectively locked out to prevent unauthorized or accidental changes to the meter’s operation. Additionally, the DPM2 meters include memory and reset of minimum and maximum display values.

- Simple Digital Display of Analog Inputs

- Panel = 96 x 48 x 83.1mm (1/8 DIN)

- Cutout = 92 x 45mm (Maximum panel thickness = 10mm)

- Case material = Polycarbonate UL 94 V-0

- Simple menu pushbutton configuration

- 4 digit (-9999 to 9999) red LED display

- Selectable decimal point

- Powered by: 11-265VDC or 20-265VAC

- Display scaling or process teaching modes

- Configuration for direct or reverse acting linear processes

- Minimum and maximum value memory

- Total or selective configuration lock-out

- Includes 24VDC sensor excitation voltage

- Process Inputs:

±10VDC, ±200VDC and ±20mA

- Temperature Inputs:

RTD: Pt100 and Pt1000
Thermocouple: J, K, T, N
Resolution: 1°C or 0.1°C

- Potentiometer Input:

100Ω to 100kΩ

- Resistance Input:

999.9Ω, 9999Ω and 50kΩ

- (2) Form C SPDT Relays:

8A @ 11-265DC, 8A @ 20-265AC
N.O. or N.C. operation
Activation on + or – input signal
Hysteresis or time delay operation