BRX access cover kit, replacement. For use with all BRX PLCs. Includes (1) battery cover, (1) expansion slot cover, (1) blank POM slot insert and (1) custom label slot cover.
Learn More
Productivity1000 DC power supply, 12-24 VDC nominal input. External power supply optional. For applications not exceeding (8) P1000 modules.
Learn More
Productivity1000 AC power supply, 120-240 VAC or 125 VDC nominal input. External power supply optional. For applications exceeding (8) P1000 modules. Learn More
BRX blank custom slot labels, package of 10. For use with 18-point and 36-point BRX PLCs. (10) labels and (1) custom label slot cover included.
Learn More
M12 cable for quick-disconnect sensors, 12mm axial female plug, 3-pole, 5 meter length, black PVC outer jacket. Do not use with SU and TU series sensors. Learn More
M12 cable for quick-disconnect sensors, 12mm right-angle female plug, 3-pole, 5 meter length, black PUR outer jacket. Do not use with SU and TU series sensors. Learn More
M12 cable for quick-disconnect sensors, 12mm axial female plug, 3-pole, 5 meter length, black PUR outer jacket. Do not use with SU and TU series sensors. Learn More
Productivity1000 analog input module, 4-channel, current/voltage, 16-bit, input current signal range(s) of 0-20 mA, input voltage signal range(s) of 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC, external 24 VDC required.
Learn More
Productivity2000 remote I/O expansion module, 4 x 10 character OLED display, RS-232 (RJ12) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2k baud, RS-485 (3-wire terminal block) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2k baud, Ethernet (RJ45) port with remote I/O at 10/100 Mbps, microB-USB port with programming and monitoring protocol(s). Installs in the CPU slot of each remote base. Learn More
Latch block, front mounted, use with any CWC07 through CWC016 series miniature contactor. Mechanically connects two CWC series mini contactors and interlocks them so that latching one resets the other. This is accomplished using two pulse input signals. Learn More
ProSense hydrostatic submersible level transmitter, 0 to 20 psig (14mof water column) sensing range, 4-20 mA, stainless steel body and polyoxymethylene (POM) ported bullet nose cap, 1/2in male NPT with shielded and vented 18mcable.
Learn More
ProSense hydrostatic submersible level transmitter, 0 to 10 psig (23.1ft of water column) sensing range, 4-20 mA, stainless steel body and non-fouling stainless steel protective cage, 1/2in male NPT with shielded and vented 40ft cable.
Learn More