Productivity2000 high-speed counter input module, 2-channel, 1 MHz, 2 general purpose inputs, 5-24 VDC, 4 general purpose outputs, 5-24 VDC. Requires one pre-wired cable and one ZIPLink module (sold separately): use pre-wired shielded cable ZL-CBL40-xS, where the x designates the following: (no value = 0.5m length), (1 = 1m length) or (2 = 2m length); use ZIPLink connector module ZL-RTB40. Learn More
Productivity2000 4-port serial communications module, (3) RS-232 (RJ12) port(s), (1) RS-485 (4-wire terminal block) port(s), all with Modbus RTU Master/Slave, ASCII IN/OUT and custom protocol(s) at up to 38.4 kbaud. Port 1 can supply power to C-more Micro panels. Learn More
Productivity2000 temperature input module, RTD, 6-channel, 16-bit resolution, input RTD type(s): Pt100, Pt1000, JPt100, Cu10, Cu25 and Ni120, input resistance signal range(s) of 0-10,000 Ohms, 0-1562.5 Ohms, 0-195.3125 Ohms, 0-3125 Ohms, 0-6250 Ohms, 0-390.625 Ohms and 0-781.25 Ohms. P2-RTB screw terminal block included. Optional P2-RTB-1 spring clamp terminal block sold separately. Pre-wired ZIPLinks not available for temperature modules. Learn More
Productivity2000 temperature input module, thermocouple, 8-channel, 16-bit resolution, input thermocouple type(s): J, E, K, R, S, T, B, N, C, input voltage signal range(s) of 0-39.0625 mV, +/- 39.0625 mV, +/- 78.125 mV, 0-156.25 mV, +/- 156 mV, 0-1.25V. P2-RTB screw terminal block included. Optional P2-RTB-1 spring clamp terminal block sold separately. Pre-wired ZIPLinks not available for temperature modules. Learn More
Productivity2000 relay output module, 16-point, 6.25 - 24 VDC, 6 - 240 VAC, FORM A (SPST), 2 common(s), 8 point(s) per common, 1A / point, 8A / common @ 60 deg C for both VAC and VDC per point, FORM A (SPST), external fusing 8A max (user supplied). Requires removable terminal block (sold separately, P2-RTB or P2-RTB-1); optional ZIPLink connector modules and pre-wired cables are available. Learn More
Productivity2000 relay output module, 8-point, 6.25 - 24 VDC, 6-120 VAC, (6) FORM A (SPST) relays, (2) FORM C (SPDT) relays, 8 common(s), isolated, 1 point(s) per common, 4A / point @ 60 deg C for VAC and VDC, 2A / point if used w/ ZIPLink cable per point, external fusing 6.3A max (user supplied). Requires removable terminal block (sold separately, P2-RTB or P2-RTB-1); optional ZIPLink connector modules and pre-wired cables are available. Learn More
Productivity2000 CPU module, 50 Mbyte user memory, real time clock/calendar, 4 x 10 character OLED display, RS-232 (RJ12) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2 kbaud, RS-485 (3-wire terminal block) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2 kbaud rate, Ethernet (RJ45) port with EtherNet/IP Scanner/Adapters, Modbus TCP, programming and monitoring protocol(s) at 10/100 Mbps, Ethernet (RJ45) port with GS Drives via GS-EDRV100 protocol(s) at 10/100 Mbps, microB-USB port with programming and monitoring protocol(s), microSD card slot for program transfer and data logging Learn More
ZIPLink PLC I/O cable, 18-position terminal block to pigtail, 90-degree connector angle, 6.5ft/2m cable length. For use with Productivity1000 I/O modules. Learn More
ZIPLink PLC I/O cable, 18-position terminal block to 24-pin connector, 90-degree connector angle, 6.5ft/2m cable length. For use with Productivity1000 I/O modules. Learn More
ZIPLink PLC I/O cable, 18-position terminal block to pigtail, 90-degree connector angle, 3.2ft/1m cable length. For use with Productivity1000 I/O modules. Learn More
ZIPLink PLC I/O cable, 18-position terminal block to 24-pin connector, 90-degree connector angle, 3.2ft/1m cable length. For use with Productivity1000 I/O modules. Learn More
ZIPLink PLC I/O cable, 18-position terminal block to 24-pin connector, 90-degree connector angle, 1.6ft/0.5m cable length. For use with Productivity1000 I/O modules. Learn More
ZIPLink PLC I/O cable, 10-position terminal block to pigtail, 90-degree connector angle, 6.5ft/2m cable length. For use with Productivity1000 I/O modules. Learn More
ZIPLink PLC I/O cable, 10-position terminal block to 24-pin connector, 90-degree connector angle, 6.5ft/2m cable length. For use with Productivity1000 I/O modules. Learn More
ZIPLink PLC I/O cable, 10-position terminal block to pigtail, 90-degree connector angle, 3.2ft/1m cable length. For use with Productivity1000 I/O modules. Learn More
ZIPLink PLC I/O cable, 10-position terminal block to 24-pin connector, 90-degree connector angle, 3.2ft/1m cable length. For use with Productivity1000 I/O modules. Learn More
ZIPLink PLC I/O cable, 10-position terminal block to 24-pin connector, 90-degree connector angle, 1.6ft/0.5m cable length. For use with Productivity1000 I/O modules. Learn More
Productivity3000 CPU module, 50 MB user memory, real time clock/calendar, 4 x 10 character LCD display, RS-232 (RJ12) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2k baud, RS-485 (3-wire terminal block) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2k baud, Ethernet (RJ45) port with EtherNet/IP Scanner/Adapters, Modbus TCP, programming and monitoring protocol(s) at 10/100 Mbps, Ethernet (RJ45) port with remote I/O and GS Drives via GS-EDRV100 protocol(s) at 10/100 Mbps, USB A port with local expansion I/O protocol(s), USB A port for program transfer and data logging with USB drive. Learn More