Search results for: 'light m'

Yellow silicone protection cap for use with metal pushbuttons. This cap will only work with metal standard size pushbuttons. They will not work with Cutler-Hammer pushbuttons or metal 22 mm pushbuttons with 40 mm actuator face. Sold in packs of 5. Learn More

Red silicone protection cap for use with metal pushbuttons. This cap will only work with metal standard size pushbuttons. They will not work with Cutler-Hammer pushbuttons or metal 22 mm pushbuttons with 40mm actuator face. Sold in packs of 5. Learn More

Green silicone protection cap for use with metal pushbuttons. This cap will only work with metal standard size pushbuttons. They will not work with Cutler-Hammer pushbuttons or metal 22 mm pushbuttons with 40 mm actuator face. Sold in packs of 5. Learn More

Clear silicone protection cap for use with metal pushbuttons. This cap will only work with metal standard size pushbuttons. They will not work with Cutler-Hammer pushbuttons or metal 22 mm pushbuttons with 40 mm actuator face. Sold in packs of 5. Learn More

Blue silicone protection cap for use with metal pushbuttons. This cap will only work with metal standard size pushbuttons. They will not work with Cutler-Hammer pushbuttons or metal 22 mm pushbuttons with 40 mm actuator face. Sold in packs of 5. Learn More

BRX temperature input module, thermocouple, 8-channel, 16-bit resolution, input thermocouple type(s): J, E, K, R, S, T, B, N, C. (1) BX-RTB10 screw terminal block included. Thermocouple module BX-08THM is shipped with terminal block kit BX-RTB10. Optional BX-RTB10-1 or BX-RTB10-2 terminal block kits sold separately. Pre-wired ZIPLinks not available for temperature modules.

Learn More

BRX temperature input module, RTD, 6-channel, 16-bit resolution, input RTD type(s): 2252, 10K-AN Type 3, 10K-CP Type 2, 5K, 3K and 1.8K ohm. Screw terminal block included. RTD module BX-08NTC is shipped with terminal block kit BX-RTB10. Optional BX-RTB10-1 or BX-RTB10-2 terminal block kits sold separately. Pre-wired ZIPLinks not available for temperature modules. Learn More

Productivity3000 CPU module, 50 MB user memory, real time clock/calendar, 4 x 10 character LCD display, RS-232 (RJ12) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2k baud, RS-485 (3-wire terminal block) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2k baud, Ethernet (RJ45) port with EtherNet/IP Scanner/Adapters, Modbus TCP, programming and monitoring protocol(s) at 10/100 Mbps, Ethernet (RJ45) port with remote I/O and GS Drives via GS-EDRV100 protocol(s) at 10/100 Mbps, USB A port with local expansion I/O protocol(s), USB A port for program transfer and data logging with USB drive. Learn More

Productivity2000 remote I/O expansion module, 4 x 10 character OLED display, RS-232 (RJ12) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2k baud, RS-485 (3-wire terminal block) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2k baud, Ethernet (RJ45) port with remote I/O at 10/100 Mbps, microB-USB port with programming and monitoring protocol(s). Installs in the CPU slot of each remote base. Learn More

Productivity2000 discrete input module, 32-point, 20.4 - 27.6 VAC/DC, sinking/sourcing, 4 isolated common(s), 8 point(s) per common. ZIPLink connector module and pre-wired cable required, purchase separately. Learn More

T-COUPLER M12 (1) MALE 5-POLE (2) M12 Learn More

T-COUPLER M12 (1) MALE 5-POLE (2) M12 Learn More

T-COUPLER M12 (1) MALE 5-POLE (2) M12 Learn More

Productivity2000 filler module, protects unused module slot connections in base Learn More

Productivity2000 CPU module, 50 Mbyte user memory, real time clock/calendar, 4 x 10 character OLED display, RS-232 (RJ12) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2 kbaud, RS-485 (3-wire terminal block) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2 kbaud rate, Ethernet (RJ45) port with EtherNet/IP Scanner/Adapters, Modbus TCP, programming and monitoring protocol(s) at 10/100 Mbps, Ethernet (RJ45) port with GS Drives via GS-EDRV100 protocol(s) at 10/100 Mbps, microB-USB port with programming and monitoring protocol(s), microSD card slot for program transfer and data logging Learn More

18mm, through-beam receiver, 20-253 VAC, 16 meter sensing distance, normally open output, 25Hz switching frequency, 2-meter cable exit Learn More

18mm, through-beam emitter, 20-253 VAC, 16 meter sensing distance, normally open output, 25Hz switching frequency, 2-meter cable exit Learn More

18mm, polarized reflective, 20-253 VAC, 3 meter sensing distance, normally open output, 25Hz switching frequency, 2-meter cable exit Learn More

120 Volt, for metal and non-metal switches and indicators. Rated 130 Volts @ 20 mA. Miniature bayonet base T31/4. Sold in packs of 5. Learn More

For miniature bayonet base lamps, red, 24 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

For miniature bayonet base lamps, blue, 120 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

For miniature bayonet base lamps, yellow, 120 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

6 Volt, for metal and non-metal switches and indicators. Rated 6 Volts @ 1.2 watts. Miniature bayonet base T31/4. Sold in packs of 5. Learn More

24 Volt, for metal and non-metal switches and indicators. Rated 24 Volts @ 80 mA. Miniature bayonet base T31/4. Sold in packs of 5. Learn More

For miniature bayonet base lamps, blue, 24 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

For miniature bayonet base lamps, white, 24 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

For miniature bayonet base lamps, yellow, 24 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

For miniature bayonet base lamps, green, 24 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

For miniature bayonet base lamps, white, 120 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

For miniature bayonet base lamps, green, 120 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

For miniature bayonet base lamps, red, 120 Volt. Works with metal and non-metal switches and incandescent indicators. Package of 2 LED lamps. NOTE: NOT COMPATIBLE WITH CUTLER-HAMMER MONOBLOCK LED INDICATORS. Learn More

18mm, polarized reflective, 10-36 VDC, PNP, 2 meter sensing distance, normally open output, right angle optics, 1kHz switching frequency, 2-meter cable exit Learn More

18mm, polarized reflective, 10-36 VDC, PNP, 2 meter sensing distance, normally open output, axial optics, 1kHz switching frequency, 2-meter cable exit Learn More

18mm, polarized reflective, 10-36 VDC, NPN, 2 meter sensing distance, normally open output, right angle optics, 1kHz switching frequency, 2-meter cable exit Learn More

18mm, polarized reflective, 10-36 VDC, NPN, 2 meter sensing distance, normally open output, axial optics, 1kHz switching frequency, 2-meter cable exit Learn More

18mm, through-beam receiver, 10-30 VDC, PNP, 20 meter sensing distance, selectable NO or NC output, 2-meter axial cable exit. Must be used with emitter. Learn More

18mm, through-beam receiver, 10-30 VDC, NPN, 20 meter sensing distance, selectable NO or NC output, 2-meter axial cable exit. Must be used with emitter. Learn More

18mm, through-beam receiver, 10-30 VDC, PNP, 8 meter sensing distance, selectable NO or NC output, 25Hz switching frequency, 2-meter cable exit Learn More

18mm, through-beam receiver, 10-30 VDC, NPN, 8 meter sensing distance, selectable NO or NC output, 25Hz switching frequency, 2-meter cable exit Learn More

18mm, through-beam emitter, 10-30 VDC, 20 meter sensing distance, 2-meter axial cable exit. Must be used with receiver. Learn More

18mm, through-beam emitter, 10-30 VDC, 8 meter sensing distance, 25Hz switching frequency, 2-meter cable exit Learn More

18mm, polarized reflective, 10-30 VDC, PNP, 2 meter sensing distance, selectable NO or NC output, 250Hz switching frequency, 2-meter cable exit Learn More

18mm, polarized reflective, 10-30 VDC, PNP, 3 meter (adjustable) sensing distance, selectable NO or NC output, 2-meter axial cable exit Learn More

18mm, polarized reflective, 10-30 VDC, NPN, 3 meter (adjustable) sensing distance, selectable NO or NC output, 2-meter axial cable exit Learn More

18mm, polarized reflective, 10-30 VDC, NPN, 2 meter sensing distance, selectable NO or NC output, 250Hz switching frequency, 2-meter cable exit Learn More

18mm, plastic, diffuse, 10-30 VDC, PNP, 1 meter sensing distance, selectable NO or NC output, 250Hz switching frequency, 2-meter axial cable exit Learn More

18mm, plastic, diffuse, 10-30 VDC, NPN, 1 meter sensing distance, selectable NO or NC output, 250Hz switching frequency, 2-meter axial cable exit Learn More

18mm, through-beam receiver, 10-36 VDC, 4-wire, NPN, 6 meter sensing distance, 1 N.O. and 1 N.C. output, right angle optics, 1kHz switching frequency, 2-meter cable exit Learn More

18mm, through-beam receiver, 10-36 VDC, 4-wire, PNP, 6 meter sensing distance, 1 N.O. and 1 N.C. output, right angle optics, 1kHz switching frequency, 2-meter cable exit Learn More

18mm, through-beam receiver, 10-36 VDC, 4-wire, PNP, 6 meter sensing distance, 1 N.O. and 1 N.C. output, axial optics, 1kHz switching frequency, 2-meter cable exit Learn More