Memory: 50 MByte total available user memory
Programming language: Ladder logic and Advanced Process Functions
Dimensions:
Maximum I/O Capacity: 4320
Communications: 5 comms ports including Ethernet.                        

• Advanced instructions and task management
• Real time clock/ Calendar
• Battery included for the retention of the Time and Date along with any Tagname values that are set up as retentive
• Hardware auto-discovery
• The CPU incorporates a programmable, 4 line x 10 character OLED Display for system alarms, status, tag data readouts and information or for displaying user-defined messages
• OLED displays on select analog modules for real-time, no meter required measurements.
• 2 Serial communications ports: 1 x RS-232 (RJ12) and 1 x RS-485 (3-wire terminal block), both supporting Modbus RTU and ASCII In/Out up to 115.2K baud rate
• 2 Ethernet ports: 10/100Mbps for connecting the remote slave to the CPU, Modbus TCP for programming and monitoring as well as communications to any Modbus TCP enabled device
• 1 Micro USB communication port: for program transfer and monitoring
• Plug-and-play USB programming (no converter cable needed)
• Data logging up to 32GB on a MicroSD card (sold separately)
• Tag database and program documentation storage on-board the CPU
• Secure Web Server for fast easy access to your data
• Choose I/O wiring needs from spring clamp, screw terminal or the popular ZipLink wiring solutions

Micro-Modular Rack-Based System

• Full line-up of 54 discrete, analogue and specialty I/O modules including high-speed
• Up to 480 local I/O points and 4,320 total I/O through remote expansion
• Auto-discover local and remote PLC bases, I/O and GS series drives
• Hot-swappable I/O, no module placement restrictions, no power budget limitations

AWARD:

Machine & Embedded Control - PACs, PLCs

FINALIST:

Productivity2000® Micro-Modular PLCs

Productivity Videos                        

P2000 Introduction

Other Videos

Hardware & Software                       

P2000 Hardware Overview

Productivity Suite Software Overview

Productivity2000 discrete input module, 16-point, 12-24 VDC, sinking/sourcing, 2 isolated common(s), 8 point(s) per common. Requires P2-RTB or P2-RTB-1 removable terminal block or ZIPLink pre-wired cables.

Productivity2000 discrete output module, 16-point, 12-24 VDC, sourcing, 1 common(s), 16 point(s) per common, 0.25A per point. Requires removable terminal block (sold separately, P2-RTB or P2-RTB-1); optional ZIPLink connector modules and pre-wired cables are available.

Productivity2000 temperature input module, thermocouple, 8-channel, 16-bit resolution, input thermocouple type(s): J, E, K, R, S, T, B, N, C, input voltage signal range(s) of 0-39.0625 mV, +/- 39.0625 mV, +/- 78.125 mV, 0-156.25 mV, +/- 156 mV, 0-1.25V. P2-RTB screw terminal block included. Optional P2-RTB-1 spring clamp terminal block sold separately. Pre-wired ZIPLinks not available for temperature modules.

Productivity2000 high-speed counter input module, 2-channel, 1 MHz, 2 general purpose inputs, 5-24 VDC, 4 general purpose outputs, 5-24 VDC. Requires one pre-wired cable and one ZIPLink module (sold separately): use pre-wired shielded cable ZL-CBL40-xS, where the x designates the following: (no value = 0.5m length), (1 = 1m length) or (2 = 2m length); use ZIPLink connector module ZL-RTB40

Productivity2000 high-speed pulse output module, 2-channel, 1 MHz, 6 general purpose inputs, 5-24 VDC, 4 general purpose outputs, 5-24 VDC. Requires one pre-wired cable and one ZIPLink module (sold separately): use pre-wired shielded cable ZL-CBL40-xS, where the x designates the following: (no value = 0.5m length), (1 = 1m length) or (2 = 2m length); use ZIPLink connector module ZL-RTB40.

Productivity2000 analog combo module, 8-channel input, 4-channel output, current, 16-bit, 0-20 mA, 4-20 mA, sourcing, external 24 VDC required. Requires removable terminal block (sold separately, P2-RTB or P2-RTB-1); optional ZIPLink connector modules and pre-wired cables are available.

Programming Software Highlights

• User defined tag-based programming for descriptive I/O naming
• Simple-to-use instructions and Easy Math to eliminate complex ladder logic
• Tools for quick access to setup, programming, debugging and control
• Task Manager for quick and easy prioritization of Ladder Logic code
• Structured data types
• Task management
• Advanced "fill-in-the-blank" instructions
• Seamless database connectivity
• Graphical HTML-based Help File
• Run-time editing
• Project file and user documentation stored in CPU
• MicroSD card slot on the CPU for data logging
• Tag database import to C-more HMI
• All in an intuitive Windows-based programming environment

Productivity Suite Software Free Download